Carbon nanotube digital electronics (2024)

References

Service, R. F. Is silicon’s reign nearing its end. Science 323, 1000–1002 (2009).
Google Scholar
Waldrop, M. M. The chips are down for Moore’s law. Nature 530, 144–147 (2016).
Google Scholar
Iijima, S. Helical microtubules of graphitic carbon. Nature 354, 56–58 (1991).
Google Scholar
Chau, R. et al. Benchmarking nanotechnology for high-performance and low-power logic transistor applications. IEEE Trans. Nanotechnol. 4, 153–158 (2005).
Google Scholar
George, S. et al. Toward high-performance digital logic technology with carbon nanotubes. ACS Nano 8, 8730–8745 (2014).
Google Scholar
20 years of nanotube transistors. Nat. Electron. 1, 149 (2018).
Tans, S. J., Verschueren, A. R. M. & Dekker, C. Room-temperature transistor based on a single carbon nanotube. Nature 393, 49–52 (1998).
Google Scholar
Martel, R., Schmidt, T., Shea, H. R., Hertel, T. & Avourisa, Ph Single- and multi-wall carbon nanotube field-effect transistors. Appl. Phys. Lett. 73, 2447–2449 (1998).
Google Scholar
Javey, A., Guo, J., Wang, Q., Lundstrom, M. & Dai, H. J. Ballistic carbon nanotube field-effect transistors. Nature 424, 654–657 (2003).
Google Scholar
Bockrath, M. et al. Chemical doping of individual semiconducting carbon-nanotube ropes. Phys. Rev. B 61, R10606–R10608 (2000).
Google Scholar
Zhou, C., Kong, J., Yenilmez, E. & Dai, H. J. Modulated chemical doping of individual carbon nanotubes. Science 290, 1552–1555 (2000).
Google Scholar
Novoselov, K. S. et al. Electric field effect in atomically thin carbon films. Science 306, 666–669 (2004).
Google Scholar
Zhang, Z. Y. et al. Doping-free fabrication of carbon nanotube based ballistic CMOS devices and circuits. Nano Lett. 7, 3603–3607 (2007).
See Also
Single-Double Multi-walled Carbon Nanotubes Modern microprocessor built from complementary carbon nanotube transistors
Google Scholar
Zhang, Z. Y. et al. Self-aligned ballistic n-type single walled carbon nanotube field-effect transistors with adjustable threshold voltage. Nano Lett. 8, 3696–3701 (2008).
Google Scholar
Ding, L. et al. Y-contacted high-performance n-type single-walled carbon nanotube field-effect transistors: scaling and comparison with Sc-contacted devices. Nano Lett. 9, 4209–4214 (2009).
Google Scholar
Zhang, Z. Y. et al. Almost perfectly symmetric SWCNT-based CMOS devices and scaling. ACS Nano 3, 3781–3787 (2009).
Google Scholar
Kim, W. et al. Electrical contacts to carbon nanotubes down to 1nm in diameter. Appl. Phys. Lett. 87, 1731011–1731013 (2005).
Google Scholar
Shahrjerdi, D. et al. High-performance air-stable n-type carbon nanotube transistors with erbium contacts. ACS Nano 7, 8303–8308 (2013).
Google Scholar
Dennard, R. et al. Design of ion-implanted MOSFET’s with very small physical dimensions. IEEE J. Solid State Circuits SC 9, 256–268 (1974).
Google Scholar
Hisamoto, D. et al. FinFET—a self-aligned double-gate MOSFET scalable to 20 nm. IEEE Trans. Electron. Devices 47, 2320–2325 (2000).
Google Scholar
Peng, L.-M., Zhang, Z. Y. & Wang, S. Carbon nanotube electronics: recent advances. Materials Today 17, 433–442 (2014).
Google Scholar
Qiu, C. G. et al. Scaling carbon nanotube complementary transistors to 5-nm gate lengths. Science 355, 271–276 (2017).
Google Scholar
Cao, Q., Tersoff, J., Farmer, D. B., Zhu, Y. & Han, S.-J. Carbon nanotube transistors scaled to a 40-nanometer footprint. Science 356, 1369–1372 (2017).
Google Scholar
Qiu, C. G. et al. Carbon nanotube feedback-gate field-effect transistor: suppressing current leakage and increasing on/off ratio. ACS Nano 9, 969–977 (2015).
Google Scholar
Qiu, C. G. et al. Dirac-source field-effect transistors as energy-efficient, high-performance electronic switches. Science 361, 387–392 (2018).
Google Scholar
Franklin, A. D. The road to carbon nanotube transistors. Nature 498, 443–444 (2013).
Google Scholar
Islam, A. E., Rogers, J. A. & Alam, M. A. Recent progress in obtaining semiconducting single-walled carbon nanotubes for transistor applications. Adv. Mater. 27, 7908–7937 (2015).
Google Scholar
Han, S.-J. et al. High-speed logic integrated circuits with solution processed self-assembled carbon nanotubes. Nat. Nanotechnol. 12, 861–866 (2017).
Google Scholar
Brady, G. J. et al. Quasi-ballistic carbon nanotube array transistors with current density exceeding Si and GaAs. Sci. Adv. 2, e1601240 (2016).
Google Scholar
Cao, Q. et al. Arrays of single-walled carbon nanotubes with full surface coverage for high-performance electronics. Nat. Nanotechnol. 8, 180–186 (2013).
Google Scholar
He, X. W. et al. Wafer-scale monodomain films of spontaneously aligned single-walled carbon nanotubes. Nat. Nanotechnol. 11, 633–639 (2016).
Google Scholar
Si, J. et al. Scalable preparation of high-density semiconducting carbon nanotube arrays for high performance field-effect transistors. ACS Nano 12, 627–634 (2018).
Google Scholar
Shulaker, M. M. et al. Carbon nanotube computer. Nature 501, 526–530 (2013).
Google Scholar
Yang, F. et al. Chirality-specific growth of single-walled carbon nanotubes on solid alloy catalysts. Nature 510, 522–524 (2014).
Google Scholar
Zhang, S. C. et al. Arrays of horizontal carbon nanotubes of controlled chirality grown using designed catalysts. Nature 543, 234–238 (2017).
Google Scholar
Collins, P. G., Arnold, M. S. & Avouris, Ph Engineering carbon nanotubes and nanotube circuits using electrical breakdown. Science 292, 706–709 (2001).
Google Scholar
Maune, H. T. et al. Self-assembly of carbon nanotubes into two-dimensional geometries using DNA origami templates. Nat. Nanotechnol. 5, 61–66 (2010).
Google Scholar
Pei, T. et al. Modularized construction of general integrated circuits on individual carbon nanotubes. Nano Lett. 14, 3102–3109 (2014).
Google Scholar
Cao, Q. et al. Medium-scale carbon nanotube thin-film integrated circuits on flexible plastic substrates. Nature 454, 495–500 (2008).
Google Scholar
Sun, D.-M. et al. Flexible high-performance carbon nanotube integrated circuits. Nat. Nanotechnol. 6, 156–161 (2011).
Google Scholar
Arnold, M. S., Green, A. A., Hulvat, J. F., Stupp, S. I. & Hersam, M. C. Sorting carbon nanotubes by electronic structure using density differentiation. Nat. Nanotechnol. 1, 60–65 (2006).
Google Scholar
Melburne, C. et al. Self-sorted, aligned nanotube networks for thin-film transistors. Science 321, 101–104 (2008).
Google Scholar
Rahul, R. et al. Carbon nanotubes and related nanomaterials: critical advances and challenges for synthesis toward mainstream commercial applications. ACS Nano 12, 11756–11758 (2018).
Google Scholar
Chen, B. Y. et al. Highly uniform carbon nanotube field-effect transistors and medium scale integrated circuits. Nano Lett. 16, 5120–5128 (2016).
Google Scholar
Yang, Y. J. et al. High-performance complementary transistors and medium-scale integrated circuits based on carbon nanotube thin films. ACS Nano 11, 4124–4132 (2017).
Google Scholar
Zhong, D. L. et al. Gigahertz integrated circuits based on carbon nanotube films. Nat. Electron. 1, 40–45 (2018).
Google Scholar
Zhao, C. Y. et al. Improving subthreshold swing to thermionic emission limit in carbon nanotube network film-based field-effect. Appl. Phys. Lett. 112, 053102 (2018).
Google Scholar
Franklin, A. D. Nanomaterials in transistors: from high-performance to thin-film applications. Science 349, aab2750 (2015).
Google Scholar
Tang, J. S. et al. Flexible CMOS integrated circuits based on carbon nanotubes with sub-10 ns stage delays. Nat. Electron. 1, 191–196 (2018).
Google Scholar
Xiang, L. et al. Low-power carbon nanotube-based integrated circuits that can be transferred to biological surfaces. Nat. Electron. 1, 237–245 (2018).
Google Scholar
Shulaker, M. et al. Three-dimensional integration of nanotechnologies for computing and data storage on a single chip. Nature 547, 74–78 (2017).
Google Scholar
Sabry, M. M. et al. Energy-efficient abundant-data computing: the N3XT 1,000x. Computer 48, 24–33 (2015).
Google Scholar

Carbon nanotube digital electronics (2024)

FAQs

Can carbon nanotubes be used in electronics? ›

CNTs are used for making transistors and are applied as conductive layers for the rapidly growing touch screen market. CNTs are considered a viable replacement for ITO transparent conductors in some applications.

Find Out More ›

What are the applications of CNT in electronics? ›

Carbon nanotubes are utilized in energy storage, device modelling, automotive parts, boat hulls, sporting goods, water filters, thin-film electronics, coatings, actuators, and electromagnetic shields.

Find Out More ›

What are 3 products that carbon nanotubes can be used in? ›

CNTs can be used in nanotechnology, automotive parts, electrical circuitry, supercapacitors, photovoltaic technology - including solar panels, LEDs, sensors, transistors, field emitting devices, fuel cells, actuators (devices that power physical movement), ceramics, batteries, absorbents, catalysts, storage devices, ...

Tell Me More ›

How are carbon nanotubes used in computers? ›

Carbon nanotube electronics can be made in 3-D stacks that bring processing and memory closer together for more efficient computing. Researchers layer carbon nanotube circuits with memory arrays on top of silicon chips and connect all the layers with dense metal wiring.

Get More Info Here ›

Are carbon nanotubes better than silicon? ›

Carbon nanotubes, though, are almost as thin as an atom. And they ferry electricity well. As a result, they make better semiconductors than silicon. In principle, carbon nanotube processors could run three times faster than silicon ones.

Keep Reading ›

Are carbon nanotubes expensive? ›

Yes, carbon nanotubes are expensive since they are rare, and they are like supermaterials.

Learn More ›

What are the downsides to using carbon nanotubes? ›

Disadvantages

Despite all of their study, scientists still don't know how they operate.
Because they are small, it is difficult to work with them.
The technique of producing nanotubes is currently rather costly.

More items...

May 15, 2023

What is better than carbon nanotubes? ›

Composites with graphene blends can be stronger and stiffer than composites with carbon nanotubes. Graphene is also better at transferring its properties to a material with which it is mixed than carbon nanotubes.

Read The Full Story ›

What are two potential future uses of carbon nanotubes? ›

These 3D all-carbon scaffolds/architectures may be used for the fabrication of the next generation of energy storage, supercapacitors, field emission transistors, high-performance catalysis, photovoltaics, and biomedical devices and implants.

Learn More Now ›

Why are nanotubes used in electrical circuits? ›

Carbon nanotubes (CNTs) have excellent electrical, mechanical and thermal properties which can be exploited to build next-generation electronics. This paper reviews different types and properties of CNTs and also presents the CNT-based electronics along with their advantage over the conventionally used products.

View Details ›

What is Moore's law? ›

Moore's Law is the observation that the number of transistors on an integrated circuit will double every two years with minimal rise in cost. Intel co-founder Gordon Moore predicted a doubling of transistors every year for the next 10 years in his original paper published in 1965.

Are carbon nanotubes a semiconductor? ›

Low-dimensional semiconductors such as one-dimensional carbon nanotubes could be used to shrink the gate length of metal–oxide–semiconductor field-effect transistors (MOSFETs) below the limits of silicon-based transistors.

Can a carbon nanotube conduct electricity? ›

Carbon nanotubes (CNTs) and graphene have large electrical conductivity and suitable flexibility for use in applications such as chemical sensing or touch screens.

Can carbon nanotubes be used in batteries? ›

CNTs can be incorporated into battery electrodes through methods such as physical mixing, chemical vapor deposition, or electrodeposition. They serve as conductive additives, improving the electrical conductivity of electrode materials and enhancing overall battery performance.

Keep Reading ›

Can carbon nanotubes be used for wiring in Aeroplanes? ›

The wiring in an aircraft can weigh more than 1,000 pounds. Conductors and EMI shielding made from carbon nanotubes could reduce the weight of such wiring by 80 percent.

See Details ›

How is carbon used in electronics? ›

Electronics: Carbon materials are used in the manufacture of electronic devices such as batteries, capacitors, and sensors due to their excellent conductivity. Energy: Carbon materials are used in the energy industry to store and transport energy.

Discover More ›